Publicidad
Idiomas disponibles
Idiomas disponibles
Insta// Washing Machine
We recommend that your new washer should to installed by a qualified
appliance technician.lf you feel that you have the skills to install the washer,
please read the installation instructions carefully before installing.
Tools needed
■
You may need to have the following tools to help you in the installation of
your washer:
•Scissors
•Gloves
■ Unpacking the washing machine
Unpacking your washing machi ne and check if is there any damage during
the transportation.Also make sure that all the the items(as shown below) in
the attached bag are received. lf there is any damage to the washing
machine during the transportation,or any item is missing or
damaged,please contact the local dealer immediately.
*lf washing machi ne is not double inlet, the machi ne does not have the hot inlet hose.
lnlet Hose
(Connect to cold
water supply)
oc
■ Select the location
Before installing the washer,the location characterized as follows shall be
selected:
- Rigid,dry,and level surface(if not level,please make it level with reference
to the following figure "Adjustable Leg").
- Avoid direct sun light.
- Sufficient ventilation.
- The ambient temperature shall be between 0-40ºC.
- The ambient humidity shall be below 95%{When the temperature is 25ºC).
- Keep far away from the heat resources such as coal or gas. Make sure
that the washer will not stand on power cord. Do not install the washer on
the carpet floor.
•Pliers
•Spanner
Hot lnlet Hose
Hole Cover (4EA)
(Connect to Hot
(Used to plug transit
water supply)
bolt holes)
•Standard Screwdriver
Drain Hose
Support Bracket
(Used to loop the end
of drain hose)
7
Spanner
(1.Used to adjust the bottom
of the machina,
2.Remove the transport bolt on
the back of the machina)
V.1
Publicidad
