Troubleshooting - POLTI Forzaspira SE110 Manual De Instrucciones

7. TROUBLESHOOTING

PROBLEM
The vacuum cleaner does
not turn on.
The vacuum
no/reduced suction.
During suction from the ap-
pliance, dust comes out.
Should the problems persist, contact an Authorised Polti Service Centre (see www.polti.com
for the up-to-date list) or Customer Services.
CAUSE
No power.
Switch off the main switch.
Dust-collector over full.
has
Adjust the suction power
to the minimum.
Dust collector not inser-
ted correctly.
Dust-collector over full.
SOLUTION
Check that the appliance is con-
nected to the power as indicated
in Chapter 1.
Turn on the main switch.
Empty the dust collector.
Increase the suction power to the
desired level.
Insert the dust collector correctly.
Empty the dust collector.
| 19 |