Descargar Imprimir esta página

Bosch AHS 50-26 Manual Original página 10

Ocultar thumbs Ver también para AHS 50-26:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
OBJ_BUCH-1549-006.book Page 10 Tuesday, May 30, 2017 10:04 AM
10 | English
 Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
 Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
 Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
 Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Hedge trimmer safety warnings
 Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off
when clearing jammed material. A moment of inatten-
tion while operating the hedge trimmer may result in seri-
ous personal injury.
 Carry the hedge trimmer by the handle with the cutter
blade stopped. When transporting or storing the hedge
trimmer always fit the cutting device cover. Proper han-
dling of the hedge trimmer will reduce possible personal
injury from the cutter blades.
 Hold the power tool by insulated gripping surfaces on-
ly, because the cutter blade may contact hidden wiring
or its own cord. Cutter blades contacting a "live" wire may
make exposed metal parts of the power "live" and could
give the operator an electric shock.
 Keep cable away from cutting area. During operation the
cable may be hidden in shrubs and can be accidentally cut
by the blade.
Additional safety warnings
 This tool is not intended for use by persons (including chil-
dren) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Wait until the machine has come to a standstill before
placing it down.
 Other persons and animals should remain at a distance of
3 metres or more when the machine is being used. The op-
erator is responsible for third persons in the working area.
 Never grasp the blade of the hedgecutter.
F 016 L81 738 | (30.5.17)
 Children or persons unfamiliar with these instructions
must not operate the hedgecutter. Local regulations may
restrict the age of the operator.
 Never cut a hedge while people, especially children or
pets, are nearby.
 The user is responsible for accidents or hazards occurring
to other people or their property.
 Do not operate the hedgecutter when barefoot or wearing
open sandals, always wear substantial footwear and long
trousers. The use of sturdy gloves, non-skid footwear and
safety glasses is recommended. Do not wear loose cloth-
ing or jewellery which can be caught in moving parts.
 Thoroughly inspect the area where the hedge trimmer is to
be used and remove all wires and other foreign objects.
 Prior to operation, check cutter blades, blade bolts and
cutter assembly for wear or damage. Do not operate with a
damaged or excessively worn cutting device.
 Check cable for damage before starting work and replace if
necessary. Keep cable away from heat, oil and sharp edges.
 Know how to stop the hedge trimmer quickly in an emer-
gency.
 Cut a hedge only in daylight or in good artificial light.
 Never operate the hedgecutter with defective guards or
without the guard in place.
 Always ensure all handles and guards supplied are fitted
when using the hedgecutter. Never attempt to use an in-
complete hedgecutter or one with an unauthorised modifi-
cation.
 Never hold the hedgecutter by the guard.
 While operating the hedgecutter always be sure of a safe
and secure operating position at all times, especially when
using steps or a ladder.
 Always be aware of your surroundings and stay alert for
possible hazards that you may not hear whilst operating
the hedgecutter.
 Remove the plug from the socket:
– before checking, clearing a blockage or working on the
hedgecutter.
– after striking a foreign object, inspect the hedgecutter
for damage and make repairs as necessary.
– if the hedgecutter starts to vibrate abnormally check
immediately.
 Keep all nuts, bolts and screws tight to ensure that the
hedgecutter is always in a safe working condition.
 The hedgecutter should be stored in a dry, high or locked
up place out of the reach of children.
 Replace worn or damaged parts for safety.
 Do not attempt to repair the machine unless you are quali-
fied to do so.
 Ensure replacement parts fitted are Bosch-approved.
 To safeguard against contact with the moving cutter blade,
this hedge trimmer is constructed with two handles each
with a blade control (switch). To operate the hedge cutter,
both controls must be actuated simultaneously. Do not
use the tool, if it runs without a switch being actuated
or just one switch being actuated.
Bosch Power Tools

Publicidad

loading