Machine And Control Panel Components - Tennant 3610 Manual Del Operador

Handle assembly:
- Release the handle locks as shown
- Rotate handle into working height position
- Return handle lock to the locking position
Connecting the Battery:
Remove the top cover to gain access to the battery using
the 4 mm hex wrench provided.
Locate the two Red/Black connectors.
Align the colors of the connectors.
Plug the two connector together.
Unlock
Handle lock
Home Find... Go To..
MACHINE AND CONTROL PANEL
COMPONENTS:
The machine is equipped with a simple panel control that
controls all the operational functions of the machine.
A) On-Off main switch of the machine
B) Led indicator for battery charge
C) Display switch
D) On-Off sweeping mode switches 1 and 2
E) Manual operating switch of the filter shaker
F) Vacuum fan switch
G) Numeric display
The functions located on the control panel can be
explained as follows:
A) Main switch to turn on and off the machine.
B) Led indicator for battery charge. Green for when the
machine is charged, red for when the machine is
discharged and yellow for when the machine charge is in
reserve or when the machine is being charged.
C) Numeric display switch: pressing this switch, a part
from seeing the machine voltage, the display indicates
the working hours of the machine (pressing the switch
once) and minutes (pressing the switch twice).
D) On-Off sweeping mode switches 1 and 2: these two
switches allow the machine to work with two separate
sweeping mode: mode 1 for light debris collection and
mode 2 for heavy debris collection.
E) Manual operating switch of the filter shaker gives the
possibility in shaking the filter at any time during work.
This is to be intended as an addition to the automatic
filter shaking that cycles every 3 minutes.
F) Vacuum fan: the vacuum fan automatically activates
when sweeping mode is on. Therefore the switch is used
when the requirements are to switch off the vacuum fan
during sweeping mode.
G) Numeric display
4