GYS toparc MT-125 Manual Del Usuario página 10

039254 (x1)
Shield
AT-125 – CUTTING :
039322 (x1)
45A
039292 (x1)
Shield
039308 (x1)
Shield
COMMON DEFECTS ROOT CAUSE
Consumables
Nozzle
Gas
10
029278 (x5)
105A
039223 (x1)
029285 (x5)
125A
Protective
shroud
Tailpipe
PRECISION CUT
039315 (x5)
45A
039216 (x1)
039162 (x5)
45A
039179 (x5)
039339 (x1)
65A
ohmic
039186 (x5)
85A
Protective
shroud
Tailpipe
039193 (x5)
039223 (x1)
105A
039209 (x5)
039445 (x1)
125A
ohmic
Tailpipe
Protective
shroud
Consumables are wear parts, it s important to know when to replace them.
Visually: welded or damaged consumables, tip hole larger than 1.5mm, weared electrode, welded pads...
Consequencies: loss of cutting performance, arc striking difficulties...
The nozzle shall be properly tightened so that all parts are correctly fixed. The nozzle shall not be easily turned.
Use compressed air with oil and water filtration.
MT-125 / AT-125
039155 (x5) 039148 (x1)
Electrode
039155 (x5)
Electrode
039155 (x5)
Electrode
Di user
039506 - 6 m
039513 - 12 m
039131 (x1)
Di user
038479 - 6 m
039520 - 12 m
039148 (x1)
Di user
038479 - 6 m
039520 - 12 m
EN
125A TRI
85A TRI
125A TRI