Maintenance Chart - RedMax BCZ3001S Manual De Instrucciones

9. Maintenance
Maintenance, replacement, or repair of the emission control
device and systems may be performed by any non-road engine
repair establishment or individual.

■ MAINTENANCE CHART

system/compornent
fuel leaks, fuel spillage
fuel tank, air filter, fuel filter
idle adjusting screw
spark plug
cylinder fins, intake air cooling vent
muffler, spark arrester, cylinder exhaust port clean
throttle trigger, stop switch
cutting parts
cutting attachment guard
angle transmission
screws/nuts/bolts
34
procedure before hours
use
✔
wipe out
✔
inspect/clean
see ■ADJUSTING
✔
IDLING SPEED (p.30)
clean and readjust
plug gap
clean
✔
check operation
replace if
✔
something's wrong
✔
make sure to attach
grease
✔
tighten/replace
every every every
25 50 100
hours hours note
after after after
✔
replace, if necessary
replace carburetor
if necessary
GAP: .025in(0.6~0.7mm)
✔
replace, if necessary
✔
✔
✔
✔
not adjusting screws
English