Dal Zotto JOLE IDRO Manual Del Usuario página 74

DISPLAY
START
the continuous feeding of the pellets
PELLET FEEDING
IGNITION
START-UP
BURN POT
The automatic burn pot cleaning is in
CLEANING
FINAL CLEANING
STAND-BY
Start-up attempt while the stove is still
COOLING
WORK
progress, the stove is operating at the
MODULATION
the stove is operating at minimum
Stove off waiting for re-ignition due
STAND - BY
STDBY-BLACK OUT
The stove is cooling after a power cut.
Displays room temperature (in the
ROOM T
Stove off due to water temperature
HOFF
The anti-freeze function is in progress
ANTI-FREEZE
as the H2O t° is below the factory set
The pump anti-locking function is in
ANTILOCK
progress (only if the stove has been in
74
All manuals and user guides at all-guides.com
DISPLAYS
REASON
The start phase is in progress
during the ignition phase is in
progress
The ignition phase is in progress
The start-up phase is in progress
progress
The final cleaning is in progress
in cooling mode
The normal operating phase is in
set power
to an external thermostat
models where provided)
over set
threshold
Off status for at least 96 hours)
ENGLISH
MEANING
Every time the stove displays one of the alarms listed above it will switch-
off automatically.
The alarm can only be released using button 1 when it switch-off has
been completed. The stove can only be switched back on when it
completely cold
The stove will only re-start when the external thermostat will
request it
Once cooling is complete, it will automatically ignite
As soon as the water temperature drops below the set parameters,
the stove will switch back on
the pump is active until the water reaches the pre-set factory
parameter +2°C
the circulator is activated for the amount of time set by the
manufacturer to prevent it from locking
_
_
_
_
_
-
-
-