AP 7007
USING
Vacuuming
Before using the appliance unroll the desired length of power cord and plug it to the mains. The yellow
mark on the cord means it has reached the maximum length, do not exceed it. To turn on the vacuum
cleaner press ON/OFF button
Important: In a few cases there may be a whistling sound at the start. It is not a
fault and the sound goes away after a time. Do not suck up toner, plaster, cement,
stone dust or drill dust. The materials would block the filter.
Regulating of suction power
You can adjust the suction power in vacuum cleaner depending on you require with
power regulator. We recommend using minimum suction power with delicate
materials. Select medium suction power for mattresses, upholstered furniture and
carpets. Select maximum suction power for tiled, wood and other robust floors.
Manual vacuum control
Manual vacuum control is in handle.
- Open: pull upwards
- Close: push downwards.
You can adjust the suction power using manual vacuum control. The wider you open it, the less suction
power and vice-versa.
Open this valve to avoid than curtains and similar objects are sucked in.
Choose:
- Minimum suction power for curtains and delicate materials.
- Medium suction power for upholstery cushions, mattresses and carpet floors.
- Maximum suction power for tiled, wooden and robust floor surfaces with heavy soiling.
Fitting and removing of microfiber dust bag
Insert carton part of dust bag into input hole, as picture shows. Press it until the
flange fit it. To remove the bag, pull of flange and pull out the dust bag.
Important: The flange prevents you use the vacuum cleaner without bag, if bag
is not well installed or there isn't bag, top cover cannot be closed therefore vacuum
cleaner won't work. If it happens to you ensure that bag is well placed.
. Pull of vacuum cleaner behind you as a sled when you are using it.
14