Stand-By Mode - Ascaso Steel Manual Del Usuario

ascaso
NB!
The PID system can be
reset in the following way: With the
machine on, press the button
The table of parameters and available values is given below:
Param. Value - Description
C
Ud
F
0
Pr
1
2
3
4
5
ON
Cr
OFF
OFF
OFF
0.5
001
002
X
U
ON
ST
OFF
C.on
CLn
OFF
7.

Stand-by mode

An energy-saving mode is included in
the UNO/DUO/PID models, which
turns the machine off after 2 hours
without activating a function.
When stand-by mode is on, only pilot
light remains lit while all others are
13
34
for
26
Degrees Celsius
Degrees Fahrenheit
Pre-infusion off
Pre-infusion 1 s
Pre-infusion 2 s
Pre-infusion 3 s
Pre-infusion 4 s
Pre-infusion 5 s
Timer on
Timer off
Stand-by mode OFF
Stand-by mode ON, starting in 0.5 h
Stand-by mode ON, starting in 1 h
Stand-by mode ON, starting in 2 h
X indicates the offset between the
regulated temperature and the one
shown on the display
Steam generation ON (in DUO
models)
Steam generation OFF (in DUO
models)
Cleaning mode activated (only in
DUO models)
Cleaning mode deactovated (only in
DUO models)
three seconds. The screen
show the text PrS, indicating that the
factory settings have been reset.
turned off.
To turn the machine on again, just
press any of the switches for the
machine to go back to its initial status,
as though turned on for the first time.
will
24
Default value
C
0
OFF
OFF
0
ON
OFF