Graco SnugRide Classic Connect 22 Guia Del Usuario

www.gracobaby.com
To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
1
To loosen straps, lift
harness tightener and
pull harness straps out.
4
Unbuckle harness
red button, and
7
Re-attach chest clip.
MAKE sure not to
twist straps.
Turn page over to
finish the rest of
the assembly
Steps 10 to 15
for the buckle
replacement.
All manuals and user guides at all-guides.com
SnugRide® Classic Connect™ 22 Rear Adjust
Buckle Replacement Guide
5
by tilting top of
buckle down,
press top of
pull tongues
out of buckle.
8
Re-insert straps through slots
in seat pad and seat back.
See carseat owner's manual
for proper height setting for
your child.
2
Pull harness straps
through seat back and
seat pad.
6
Remove and
discard tongues.
9
Re-insert straps back into the tightener
and cross the tails through the belt path as
©2014 Graco PD265294B 1/14
3
Remove chest clip.
DO NOT DISCARD
the chest clip.
Slide NEW buckle
onto harness straps.
MAKE sure not to
twist straps.
shown.