Select Button; Data Hold Button; Auto Power Off; Measuring Ac And Dc Voltage - Amprobe AM-500 Manual De Uso

SELECT
Button
DATA
HOLD

SELECT Button

Press the yellow SELECT button to select alternate
measurement functions on the rotary switch.

DATA HOLD Button

Press DATA HOLD button to freeze present reading on
display. Press again to resume normal operation.

Auto Power OFF

Auto power off: approx. 15 minutes.
When the Meter is in auto power off mode, press SELECT
or DATA HOLD button to resume normal operation.

Measuring AC and DC Voltage

Press SELECT button to switch to DC voltage
measurement function.
X�
Do not apply on a voltage source higher than
AC/DC 600V.
Press to select altemate measurement
functions on the rotary switch.
Display freezes present reading
6