CAIRE FreeStyle Comfort Manual Del Usuario página 16

FreeStyle Comfort
4. Turn on the FreeStyle Comfort by pressing the power
button and select your prescribed flow setting utilizing
the increase (+) or decrease (-)flow buttons.
Note: If the battery pack needs to be recharged, the battery
icon on the display will have a single orange bar.
DC POWER
DC power is for use in the accessory outlets of
automobiles, boat, or other motor vehicles. The FreeStyle
Comfort is fully functional for use on DC power. The
FreeStyle Comfort will also recharge the battery pack if
needed any time DC power is available. The battery pack
will recharge both if the unit is off, or on and in use.
WARNING: DO NOT CONNECT
EXTERNAL POWER WITHOUT A BATTERY
PACK INSTALLED IN THE OXYGEN
CONCENTRATOR.
WARNING: DO NOT OPERATE THE DEVICE ON 12 VDC
CAR OUTLETS WHILE THE VEHICLE IS TURNED OFF.
1. Turn on your motor vehicle.
2. Connect the DC power supply to the power port
receptacle front, bottom right side of the FreeStyle
Comfort. Be sure to push inward so that the connection
is secure.
16 - ENG PN MN250-C4 H | User Manual
3. Connect the opposite end of the DC power cord to the
automobile or other DC accessory outlet.
4. Turn on the FreeStyle Comfort by pressing the power
button and select your prescribed flow setting utilizing
the increase (+) or decrease (-)flow buttons.
Note: If the battery pack needs to be recharged, the battery
icon on the display will have a single orange bar.