Descargar Imprimir esta página

Medisana 61157 Instrucciones De Manejo página 19

Ocultar thumbs Ver también para 61157:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
3.2 Cleaning and maintenance
Heat pad
Before cleaning the pad, unplug it from the mains outlet and let it cool down for
at least ten minutes.
The heat pad is equipped with a removable control unit (HP 630).
Unplug the control unit from the heat pad by pulling out the connection cable
from the plug on the heat pad.
The heat pad can be cleaned dry (with a soft brush) or as described in the instruc-
tions on the product label.
Never use strong detergents or hard brushes.
To dry, lay the pad flat on a moisture-absorbent towel or mat.
Only use the blanket again once it is completely dry.
Reconnect the control unit to the heat pad in the
correct manner (please see the sketch, the arrow
markings are showing towards each other).
You should untangle the cable from time to time.
Store the unit in a clean and dry place, laid out flat
with nothing covering or resting on top of it.
3.3 Disposal
This product must not be disposed together with the domestic waste. All
users are obliged to hand in all electrical or electronic devices, regardless of
whether or not they contain toxic substances, at a municipal or commercial
collection point so that they can be disposed of in an environmentally accep-
table manner. Consult your municipal authority or your dealer for information about
disposal.
3 Miscellaneous
GB
E
E
15

Publicidad

loading

Este manual también es adecuado para:

Hp 630