CASO DESIGN VRH 690 Manual De Instrucciones página 43

17.7 Marinate with a Canister
1. Wipe canister cover and canister and ensure they are clean and dry.
2. Fill the vacuum goods into the canister. Be careful not to fill in too much vacuum goods.
3. Connect one end of vacuum hose at the connector at device and other end at connector
at canister cover or with the adapter at canister lid.
4. Close the lid and press down firmly on the front handle
5. Press "Marinieren" (marinate) button. Air is removed and automatically reinserted after
the vacuuming process. The device will work for 5 cycles.
6. When the progress LED turns off, then the marinate process is completed. Remove the
vacuum hose from canister cover and from device.
You can cancel the operation by pressing button Vacuum & Seal / Cancel (Vakuum &
Schweißen/Abbrechen).
17.8 Storage
Store the device in its upright position, out of the reach of children.
PLEASE NOTE
► Always unplug the appliance from its outlet immediately after using and before
cleaning.
► For the correct storage, please slightly
close the cover, do not lock, it will deform
the gaskets and affect the machine
function.
► Put the power cord into the storage box
which is in the back of the machine. Do not
wrap the cord around the device..
.
43