Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 Distance
•
Fit contact wheel as chosen for user's application.
•
Press "measure" or keep the "measure" button pressed, now place the
contact wheel on the moving surface and read the linear rate, ensure
wheel is vertical to the moving surface.
•
Press "stop" or release the "stop" button to stop the measurement, the
tachometer will then hold the last reading on the display.
•
The instrument retains selected measurement mode for further distance
measurements after switching off the tachometer, until used to a
different mode.
Fig. 11 – Units and wheels
During the distance measurement, the tachometer records the measured
distance over time. After the measurement, the statistics of the
measurement are shown (distance and time). You can toggle between graph
and values by pressing the right button (Button 2).
The Menu can be changed by pressing the left button (button 1).
20 EN
Units can be changed in the
settings
When measuring a dot is used
to indicate decimals
Icon shows which wheel to use
(determined in the settings)
Note that the measuring time only
appears when a measurement is
started and a signal is received
Distance units:
Feet (ft)
Inch (inch)
Meter (m)
Available wheel sizes:
0.1 m
6 inch
12 inch
Units and wheel size are determined in the settings
Publicidad
