MAHLE Digital ADAS Manual De Instalación página 29

7.11
Fitting the laser
rangefinders
The rangefinders are equipped
with a rechargeable battery. To
recharge the battery, connect the
rangefinder using the special ca-
ble supplied to the PC or mains
adapter.
Refer to the rangefinder manual for the actual
battery power voltage.
Rangefinder assembly
1 Insert the batteries into the two laser
rangefinders
2 Position the laser meters into the
aluminium support, aligning the laser
meter to the back of the support.
Tighten the fixing screw
Mount the rangefinders on the trolley
3
4 Verify on the display that the measure-
ment mode is from the back side
2
4
29
3