MAHLE Digital ADAS Manual De Instalación página 31

8. First start-up of the equipment
8.1
First start-up and configu-
ration of the digital target
The first startup / configuration of
the Digital ADAS system must be
done by the dealer.
First start-up and configuration of the
digital target
1 Connect the plug of the power cord of
the multiple socket to a Shuko 230V
50Hz electrical socket
2 Switch on the multiple socket using
the switch
Note: the Digital ADAS CPU should
turn on automatically, if it does not
start, press its power button
3 Turn on the digital target with the
appropriate remote control
Select the desired language and
4
country
Note: skip the connection of the
digital target to the internet
5 View and accept the digital target
license agreement
6 Select the port to which the Digital
ADAS CPU is connected (normally it
is HDMI1)
Now go to the configuration of the
7
Digital ADAS CPU
31