Kasanova BL72D Manual De Instrucciones página 8

PORTABLE BLENDER WITH 2 JUICE CUPS
8
PRODUCT USAGE
Before using the product for the first time, please thoroughly clean the parts in contact with food
materials.
Note: Do not use the machine in excess of capacity, which may cause damage to the
machine or shorten its service life; If the amount of processed food is more than Large,
multiple processing is recommended.
1- Cut the ingredients into about 1.5 cm blocks and put them into the bottle, then add some
water or milk. The food should not exceed the maximum capacity of the cup; the temperature
of the ingredients put in should not exceed 40°C, and the amount added should not exceed the
maximum scale of the cup, otherwise the machine may be damaged or the service life may be
shortened; If the amount of processed food is large, it is recommended to process it several times.
2- Screw the knife base and bottle clockwise;
3- Put the cup upside down into the main body;
4- Connect the power supply;
5- Exert downward force to start the machine Make; After lifting the hand, the machine stops
working, and the working time should be ≤ 1 minute.
6- After the processing is completed, disconnect the power supply, remove the cup assembly
from the main body, unscrew the knife base and drink, or cover the cup cover to prevent dust
and leakage.
CLEANING AND MAINTENANCE
1. After using the product, please disconnect the power supply and clean the product in time.
2. Do not use steel wire balls, abrasive cleaners or corrosive liquids (such as gasoline and
acetone) to clean this product.
3. The main body can be wiped with a wrung wet cloth; Do not wash, soak or spray in water or
other liquids to avoid damage to components, bad or the product leaks electricity.
4. Please wash the inside of the bottle and the parts in contact with food with clean water, and
wipe or air dry in time. Please operate carefully to avoid cutting (Protective gloves can be worn).
5.Quick cleaning: add proper amount of water into the cup body and tighten it with the knife base,
install it on the main body, turn on the power, press the switch button Stop after 10 seconds. After
cleaning, disconnect the power, take down the cup, open the cup cover, pour out the water, and
wipe the cup dry or air dry.
6. Before storage, please ensure that the product is clean and dry, and place it in a dry, ventilated
place away from direct sunlight.