Descargar Imprimir esta página

Senco FinishPro 2n1 Instrucciones De Operación página 17

Ocultar thumbs Ver también para FinishPro 2n1:

Publicidad

Idiomas disponibles

Idiomas disponibles

Read All Safety Warnings Before Using Air Compressor
Hazard
Risk of
Explosion or Fire
Risk of
Bursting
Safety Warnings
Potential Consequence
 Serious injury or death may
occur from normal electrical
sparks in motor and pressure
switch.
 Serious injury may occur if any
air compressor ventilation
openings are restricted,
causing the air compressor to
overheat and start on fire.
 Serious injury or death may
occur from an air tank
explosion if air tanks are not
properly maintained.
 Serious injury may occur from
an air compressor malfunction
or exploding accessories if
incorrect system components,
attachments or accessories are
used.
5
Prevention
 Always operate air compressor
in a well ventilated area free of
flammable vapors, combustible
dust, gases or other
combustible materials.
 If spraying flammable material,
locate the air compressor at
least 6 meters away from the
spray area. (An additional hose
may be required.)
 Never place objects against or
on top of air compressor.
Operate air compressor at least
30 cm away from any wall or
obstruction that would restrict
proper ventilation.
 Drain air tank daily or after
each use to prevent moisture
buildup in the air tank.
 If air tank develops a leak,
replace the air tank
immediately. Never repair, weld
or make modifications to the air
tank or its attachments.
 Never make adjustments to the
factory set pressures.
 Never exceed manufacturer's
maximum allowable pressure
rating of attachments.
 Because of extreme heat, do
not use plastic pipe or lead tin
soldered joints for a discharge
line.
 Never use air compressor to
inflate small, low pressure
objects such as toys.
 All hoses and fittings shall be
suitable for site use at the
maximum allowable working
pressure of the portable
compressor.
 Use only genuine SENCO®
repair parts for your air
compressor.

Publicidad

loading

Este manual también es adecuado para:

Finishpro 10Finishpro 15Finishpro 18Ls1xp