Publicidad
Colour Macros
CM01
=
Red
CM02
=
Amber
CM03
=
Yellow warm
CM04
=
Yellow warm
CM05
=
Green
Confirm with ENTER. The cursor appears in the bottom line, in the "Dimmxx" field. Then press the UP and DOWN buttons to select the desired
brightness (Dimm00 = Blackout, Dimm01 = minimum brightness, Dimm99 = maximum brightness). Adjust the flash frequency of the strobe effect
by pressing ENTER again until the cursor shows "Flashxx". Now you can activate the strobe effect using the UP and DOWN buttons and set the flash
speed from 00 to 99 (F00 = strobe effect deactivated, F01 = approx. 1 Hz, F99 = approx. 20 Hz). Confirm with ENTER.
03.DREAM - Various colours that blend into each other. The brightness and speed of the program is separately adjustable and a stroboscope effect
can also be activated.
04.FADE - Pixel Control Program. The individual LEDs are activated one after the other in specific sequences with varying colours. The brightness
and speed of the program is separately adjustable and a stroboscope effect can also be activated.
05.FADE - Pixel Control Program. The individual LEDs are activated one after the other in a specific sequence with varying colours that blend into
each other. The brightness and speed of the program is separately adjustable and a stroboscope effect can also be activated.
06.CHANGE - Various alternating colours. The brightness and speed of the program is separately adjustable and a stroboscope effect can also be
activated.
07.-13. FLOW1 - FLOW7 - Pixel Control Programs. All programs consist of various programmed colour change effects. The brightness and speed of
the program is separately adjustable and a stroboscope effect can also be activated.
Operating the internal programs 03 to 13: Using the UP and DOWN buttons, select the desired program. Confirm with ENTER. The cursor ap-
pears in the bottom line, in the "Dimmxx" field. Then press the UP and DOWN buttons to select the desired brightness (Dimm00 = blackout, Dimm01
= minimum brightness, Dimm99 = maximum brightness). Press ENTER again to confirm the change and move the cursor to the field "Speedxx". Us-
ing the UP and DOWN buttons, the speed of the effect can be set (Speed00 = slowest speed, Speed99 = fastest speed). Adjust the flash frequency of
the strobe effect by pressing ENTER again until the cursor shows "Flashxx". Now you can activate the strobe effect using the UP and DOWN buttons
and set the flash speed from 00 to 99 (Flash00 = strobe effect deactivated, Flash01 = approx. 1 Hz, Flash99 = approx. 20 Hz). Confirm with ENTER.
14. - 15. FLOW8 - FLOW9 - Pixel Control Programs. All programs consist of various programmed colour change effects. The brightness and speed
of the program is separately adjustable and a stroboscope effect can also be activated. In addition, the program colours can be selected by the user.
Operating the internal programs 14 to 15: Using the UP and DOWN buttons, select the desired program. Confirm with ENTER. The cursor
appears in the bottom line, in the "C1:x" field (Colour 1). Using the UP and DOWN buttons, select one of the 7 available colour presets or Blackout. If
a certain colour preset is selected for Colour 1, this is no longer available for Colour 2 and vice versa.
Colour Macros C1 and C2
R
=
Red
G
=
Green
B
=
Blue
RG
=
Yellow
Press ENTER to confirm, and adjust the brightness of the Colour 1 from 00 to 99 by using the UP and DOWN buttons (Dimm1:00 - Dimm1:99). You
can adjust the colour preset and brightness for Colour 2 in the same way (ENTER-> UP + DOWN). Again press ENTER, and you can now adjust the
speed (Speed00 - Speed99) and strobe effect (Flash00 - Flash99) in the same way, as desired.
FLOW INVERT
The direction of flow of lighting sequences, for example, in the METEOR program, can be inverted using the "FLOW INVERT" function. Press the
MODE button repeatedly until "FLOW INVERT" appears on the display. Press ENTER, and using the UP and DOWN buttons, select whether the direc-
tion is to be inverted (ON), or not (OFF). To confirm the input, press ENTER.
16
CM06
=
Turquoise
CM07
=
Cyan
CM08
=
Blue
CM09
=
Lavender
CM10
=
Mauve
GB
=
Cyan
RG
=
Magenta
RGB
=
White
BLAC =
Blackout
CM11
=
Magenta
CM12
=
Pink
CM13
=
Warm White
CM14
=
White
CM15
=
Cold White
Publicidad
