Publicidad
Switch the power onto check the
operation of the light kit and fan.
9. Install the lamp shade onto the lamp
stud by rotating the lamp shade
clockwise.
Maintenance
HOW TO REPLACE A LIGHT BULB
1. Switch the device off (preferably, turn
it off at the circuit breaker) and leave to
cool.
(Take care: light bulbs can get very hot
when in use.)
2. Remove the bulb by holding it firmly
and turning it anti clockwise.
3. Take a new bulb and put it carefully
into its holder. Screw it in clockwise.
4. Put the power supply on again and
switch on.
Important: The bulbs for this fan must
be R7S / 60W.
Environment
Meaning of crossed –out wheeled
dustbin:
Do not dispose of electrical appliances
as unsorted municipal waste, use
separate collection facilities.Contact
your local government for information
regarding the collection systems
available.
If electrical appliances are disposed of
in landfills or dumps, hazardous
substances can leak into the
groundwater and get into the food
chain, damaging your health and
well-being.d seriously compromise the
appliance's safety and render the
warranty invalid.
Remote control operation
On / Off function: Turn on Turn off light.
3 Speeds:
LOW: Low speed
MED: Average speed
HI: High Speed
STOP: The fan stops
Command to function distance
LOW: Starts the fan at low speed.
MED: Average speed
HI: High speed
STOP: Stop function
1H: Schedule 1 hour
2H: Schedule 2 hours
4H: Schedule 4 hours
8H: Schedule 8 hours
Light ON / OFF:
3 color temperatures
3,000K warm light,
4,500K Natural light
and 6,000K White light
Press the central LIGHT ON / OFF button several
times to choose the desired temperature of the
Light from the 3 options available.
Remote control connection
8
Publicidad
