Fermax DUOX SKYLINE KIT 3-12L Manual De Instalador página 59

DUO DUO X SKYLINE KIT 3-12L X SKYLINE KIT 3-12L
DUO DUOX SKYLINE KIT 3-12L DUO X SKYLINE KIT 3-12L X SKYLINE KIT 3-12L
DUO DUOX SKYLINE KIT 3-12L DUO X SKYLINE KIT 3-12L X SKYLINE KIT 3-12L X SKYLINE KIT 3-12L
DUO DUO X SKYLINE KIT 3-12L
The street panel´s parameters can be programmed on the keypad.
1.1 Accessing Programming. A + 4444 (default code).
If the code is correct, a confirmation tone sounds (beep-beep).
1.2 Configuring the different Parameters
The configuration of a parameter is done by entering: two digits of its position, and a
beep is heard and the desired value (1,2,3 or 4 digits relative to the parameter function).
If the value is correct, a confirmation tone sounds (beep-beep) and the new value is
saved. If not correct you will hear the error sound (beep-bop).
In order to exit the programming press 'A' when we are entering the menu´s parameter
number. You can also exit by waiting 60 seconds without pressing any key.
Configuration of a Parameter:
A + Access code for programming + Position + Possible Values
PROGRAM THE PANEL NUMBER,
Position Adjustments Parameter
Panel Num. (PL)
06
Configuration of a panel number:
A + 4444 + 06 + 0-9
Example:
•
Change panel number 2:
A 4444(beep-beep) 06 (beep) 2 (beep-beep)
If your installation is characterised by having General Entrances, Interior Blocks
and/or Sub-blocks, you must also program:
Position Adjustments Parameter Possible Values [default]
Panel type
03
Block Num. (BK)
04
05 Sub-Block num. (BS)
We recommend filling in the amplifier´s sticker once each panel is programmed.
Examples:
General Entrance and
panel number 3
TYPE Nº
X
EG
BK
BK
SB
3
Nº PL
5. RESET TO DEFAULT VALUES (if necessary)
A 4444 (beep-beep) 13 (beep) 1 (beep-beep)
Possible Values [default]
0-9 [0]
0:
Sub-Block (SB)
[1]:
Block (BK)
2:
General entrance (GE)
00-99
[00]
00-99
[00]
Block 1 and panel number 2
TYPE Nº
EG
01
X
BK
BK
SB
2
Nº PL
Comments
Panel number.
TYPE
Nº
EG
BK
BK
SB
2
Nº PL
Comments
Configuration of the
panel type.
Block number the panel
belongs to
Sub-Block number the
panel belongs to
Sub- block 2 and panel
number 3, belonging to
block 1
TYPE
Nº
EG
BK
02
X SB
3
Nº PL
BK
01
Pag 59