Publicidad
Idiomas disponibles
Idiomas disponibles
LS 14, 16, Cart
WARNING Slipping, tripping and falling
hazards
There is a risk of slipping or tripping or falling, for
example tripping on the hoses or on other objects.
Slipping or tripping or falling can cause injury. To
reduce this risk:
Always make sure that no hose or other object is
►
in your way or in any other person's way.
Always make sure you are in a stable position with
►
your feet as far apart as your shoulders width and
keeping a balanced body weight.
WARNING Motion hazards
When using the machine to perform work-related
activities, you may experience discomfort in the
hands, arms, shoulders, neck, or other parts of the
body.
►
Adopt a comfortable posture whilst maintaining
secure footing and avoiding awkward off-balanced
postures.
Changing posture during extended tasks may help
►
avoid discomfort and fatigue.
In case of persistent or recurring symptoms,
►
consult a qualified health professional.
WARNING Material hazard
During operating, the material that you operate in
can become hot and fall down, which can cause a
fire or even an explosion. This can lead to personal
injury or death.
►
Always consider the direction of the falling object.
Wear fire resistant clothing and have a bucket of
►
water nearby.
WARNING Trapping hazard
There is risk of neck ware, hair, gloves and clothes
getting dragged into or caught by a rotating insertion
tool or accessories. This may cause choking,
scalping, lacerations or death. To reduce the risk:
►
Never grab or touch a rotating blade.
Avoid wearing clothing, neck ware or gloves that
►
may get caught.
Cover long hair with a hair net.
►
WARNING Grinding hazard
Using the side of the cutting blade can cause that
the blade jam or break. Pressure from the side can
damage the cutting blade. This can result in personal
injury. To reduce risk:
Never grind by using the side of the cutting blade.
►
Never use the cutting blade if it has been
►
damaged.
►
Never grind over the maximum peripheral speed.
© 2010 Atlas Copco Construction Tools AB | No. 3392 5042 90b | 2010-01-01
Original instructions
Safety and operating instructions
Always feed the machine down in line with the
►
cutting blade.
►
Only use the cutting section.
Never pull the machine to one side.
►
WARNING Vibration hazards
Normal and proper use of the machine exposes the
operator to vibration. Regular and frequent exposure
to vibration may cause, contribute to, or aggravate
injury or disorders to the operator's fingers, hands,
wrists, arms, shoulders and/or nerves and blood
supply or other body parts, including debilitating
and/or permanent injuries or disorders that may
develop gradually over periods of weeks, months, or
years. Such injuries or disorders may include damage
to the blood circulatory system, damage to the
nervous system, damage to joints, and possibly
damage to other body structures.
If numbness, persistent recurring discomfort, burning
sensation, stiffness, throbbing, tingling, pain,
clumsiness, weakened grip, whitening of the skin, or
other symptoms occur at any time, when operating
the machine or when not operating the machine, stop
operating the machine, tell your employer and seek
medical attention. Continued use of the machine after
the occurrence of any such symptom may increase
the risk of symptoms becoming more severe and/or
permanent.
Operate and maintain the machine as recommended
in these instructions, to prevent an unnecessary
increase in vibration.
The following may help to reduce exposure to
vibration for the operator:
►
Let the tool do the job. Use a minimum hand grip
consistent with proper control and safe operation.
►
If the machine has vibration absorbing handles,
keep them in a central position, avoid pressing the
handles into the end stops.
When the percussion mechanism is activated, the
►
only body contact with the machine you should
have are your hands on the handle or handles.
Avoid any other contact, for example supporting
any part of the body against the machine or
leaning onto the machine trying to increase the
feed force. It is also important not to keep the start
and stop device engaged while extracting the tool
from the broken work surface.
Make sure that the inserted tool is well-maintained
►
(including sharpness, if a cutting tool), not worn
out, and of the proper size. Insertion tools that are
not well-maintained, or that are worn out, or that
are not of the proper size result in longer time to
complete a task (and a longer period of exposure
to vibration) and may result in or contribute to
higher levels of vibration exposure.
11
Publicidad
