Publicidad
Idiomas disponibles
Idiomas disponibles
LS 14, 16, Cart
Technical data
Troubleshooting
Problem
Saw turns too fast or develops too much
torque
Saw will not turn at all or turns too slowly
Saw does not develop enough torque
(insufficient power to cut material)
Machine data
Type
Weight without hoses and blade
Oil flow range
Max pressure relief valve setting on power
source
EHTMA category
Max back pressure in return line (measured at
saw)
Oil working temperature
Motor performance (max)
Motor torque (max)
Circumferential speed
Number of revolutions
Blade size
Arbor hole diameter
Cutting depth when used handheld
Cutting depth when mounted in cart
Required cooling capacity
© 2010 Atlas Copco Construction Tools AB | No. 3392 5042 90b | 2010-01-01
Original instructions
Cause
Connected to improper power source
Power source not adjusted correctly
Power supply defect
Valve block defect
Motor defect
Power supply defect
Motor defect
LS 14
9.8 kg (21.6 lb)
20-30 lpm (5-8 US gal/min)
170 bar (2500 psi)
C and D
30 bar (450 psi)
30-70°C (86-158°F)
6.7 kW (9.0 HP)
16 Nm (11.8 ft-lbs)
46-75 m/s (151-246 ft/s)
2500-4000 rpm
355 mm (14 in)
25.4 mm (1 in)
133 mm (5.2 in)
100 mm (3.9 in)
Approx. 1.5 kW
Safety and operating instructions
Solution
Use proper power source
Adjust power source flow and pressure
settings as per the manufacturer's
instructions
Disconnect saw and check power supply
Repair or replace
Disconnect power source and try to turn the
motor shaft by hand. Repair or replace
Repair or replace
Repair or replace
LS 16
10.6 kg (23.4 lb)
20-40 lpm (5-10 US gal/min)
170 bar (2500 psi)
C, D and E
30 bar (450 psi)
30-70°C (86-158°F)
8.8 kW (12.0 HP)
21 Nm (15.5 ft-lbs)
42-85 m/s (138-279 ft/s)
2000-4000 rpm
405 mm (16 in)
25.4 mm (1 in)
160 mm (6.3 in)
125 mm (4.9 in)
Approx. 2 kW
19
Publicidad
