Publicidad
Idiomas disponibles
Idiomas disponibles
Safety and operating instructions
Switch OFF the water lever of the tank and
●
disconnect the water hose of the tank from the
nipple on the cut-off saw.
●
Disconnect the cable link from the trigger on the
saw.
Disconnect the lever holder from the safety trigger
●
of the saw.
Untighten the screws (1).
●
●
Disconnect the body of the cut-off saw from the
brackets (2).
Labels
The machine is fitted with labels containing important
information about personal safety and machine
maintenance. The labels shall be in such condition
that they are easy to read. New labels can be ordered
from the spare parts list.
Data plate
Maximum permitted hydraulic oil flow
A.
Machine type
B.
C.
Maximum permitted hydraulic pressure
The warning symbol together with the book
D.
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
Serial number (is also stamped in the valve
E.
housing).
F.
The CE symbol means that the machine is
EC-approved. See the EC declaration which
is delivered with the machine for more
information.
Year of manufacture.
G.
14
Direction of rotation
The red sticker on the blade guard shows the
direction of rotation.
Cutting blade speed rating
Never use a cutting blade with a lower speed rating
than the machine's. A minimum cutting blade speed
rating of 4400 rpm is recommended.
Noise level label
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
EHTMA category
The machine is clearly marked with EHTMA
categories. It is important that any power source used
is in a compatible category. If any doubt, consult an
authorised supervisor.
© 2010 Atlas Copco Construction Tools AB | No. 3392 5042 90b | 2010-01-01
LS 14, 16, Cart
Original instructions
Publicidad
