Publicidad
Idiomas disponibles
Idiomas disponibles
Using DAB Options Functions
The following functions are available by touching
.
Seek By
Sets the station search mode: [A-Z] (Search by
station name), [Station Gp] (Search by station
group).
Announce
Enables DAB announcements with interrupting
the currently selected source: [ON], [OFF].
During a DAB announcement, the volume is
adjusted to the level set for TA in RDS (page 9).
Soft Link
Searches for and tunes to the same or similar
program automatically when the signal of the
current program is too weak to receive: [ON],
[OFF].
"Hard Link" follows the same program, and "Soft
Link" follows a similar program.
DAB
Soft Link
Hard
Link
OFF
ON
Information
Displays the currently selected station group
name, station name, PTY type of the station, etc.
Antenna Power
Supplies power to the DAB antenna (aerial) input
terminal: [ON], [OFF].
FM
Soft
Hard
Soft
Link
Link
Link
–
–
Playback
Playing a USB Device
MSC (Mass Storage Class) type USB devices*
compliant with the USB standard can be used.
* e.g., a USB flash drive, digital media player
Notes
• USB devices formatted with file systems FAT12/16/32/
exFAT are supported.
• For details on the compatibility of your USB device, visit
the support site on the back cover.
• For details on the supported file formats, see "Supported
formats for USB playback" (page 18).
1
Turn down the volume on the unit.
2
Connect the USB device to the USB port.
3
Press HOME, then touch [USB].
Playback starts.
To remove the device
Turn the unit off or turn the ignition switch to the
ACC off position, then remove the USB device.
Playing a BLUETOOTH Device
You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile).
1
Make a BLUETOOTH connection with the
audio device (page 7).
2
Press HOME, then touch [BT Audio].
3
Operate the audio device to start playback.
Notes
• Depending on the audio device, information such as title,
track number/time, and playback status may not be
displayed on this unit.
• Even if the source is changed on this unit, playback of the
audio device does not stop.
• BLUETOOTH pairing is not possible while Apple CarPlay is
running.
To match the volume level of the BLUETOOTH
device to other sources
You can reduce the volume level differences
between this unit and the BLUETOOTH device:
During playback, touch
Level]. Adjust the volume level between [-6] and
[+6].
, then touch [Input
11
GB
Publicidad
