Eleglide M2 Manual Del Usuario página 13

EN
Hidden Menu
First, long press both
among different menu pages. Different pages are for setting different functions. Third, after selecting
the page you want, short press the light switch to stay on this page and short press
the item on the page. Fourth, short press the light switch again to remain your setting. Last, short
press the on/off button to exit the hidden menu.
P1: adjusting the backlight brightness
between level 1-3.
P3: setting the speed limit within 0-25km/h;
The default speed limit is 25km/h.
Tips:
1. When the locking function is activated, you'll need to enter the password to access to use of the
display. It is a 3-digit cord. The default password is 111.
2. To enter the password, press
double press the on/off button to move to the next digit place.
3. The password can only be altered via the Eleglide app.
4. If you forget the password, you can restore the factory settings via the Eleglide app. And the
password will be changed back to 111.
10
and to enter the hidden menu. Second, short press
MODE
MODE
MODE
and
P2: setting the screen timeout within
0-30 minutes; 0 means it never sleeps.
P4: setting the default speed level;
0 means starting at speed level 0, and 1
means starting at speed level 1.
P7: turning on/off the bike locking function; 0
means the locking function is turned off, and 1
means the locking function is activated. The
default setting is 0.
to select the number for the current digit place and
or to shift
or to set
MODE
MODE