Eleglide M2 Manual Del Usuario página 4

please read the user manual carefully!
Contents
1. Note
2. Warning
3. Diagram
4. Specification
5. Package List
6. Assembly Guide
7. Display Guide
8. App Guide
9. Maintenance
10. Troubleshooting
11. Warranty
12. Compliance Statements
1. Note
Before your first ride, it is important for you to know your new pedelec well, so that you can get the best
performance, comfort, enjoyment and safety from it during your ride. To understand the new bicycle
and the correct operation, you should first read the manual carefully.
Second, it is significant to take your first ride under a safe and controlled circumstance, like staying
away from cars, obstacles and other cyclists.
Third, bicycles are vehicles with certain risks. Please follow the traffic rules during cycling. It's better to
learn the local traffic rules about riding an pedelec on public roads before your first ride in case you
violate the regulations. For your own safety, never forget to put on a qualified helmet before you get on
the pedelec.
Fourth, the pedelec is supplied without basic mandatory equipment, which may vary from place to
place. Therefore, if you intend to use the pedelec on public roads, it's necessary to equip the bike with
the basic mandatory equipment, in accordance with the relevant laws and regulations.
In addition, this product is designed for your personal use. Do not use it for commercial or other
purposes.
Last, keep this manual safe for reference.
2. Warning
Before each charge, check the charger, cable and plug. If there is any damage, do not use the charger.
Before riding, check the tire pressure and check whether the wheels and handlebar are installed
correctly and tightly.
Before riding, check whether the headlights are securely fastened in the correct position, clean and not
covered by anything. Damaged reflectors must be replaced.
Besides, if the seat post in the seat tube is not inserted deep enough to reach the minimum insertion
mark, the seat post may break. Check whether it is inserted deeper than the minimum insertion depth.
*Before your first operation,
EN
01