Eleglide M2 Manual Del Usuario página 14

Error Tracking
MODE
TRIP
Error Codes Causes
E01 The motor is out of phase.
E04 Communication error;
E08 Under-voltage fault;
E10 Controller fault;
E40 Motor hall signal abnormality;
km
Solutions
a.Replace the motor;
b.Replace the motor adapter cable;
c.Replace the controller;
a.Re-connect the display and controller;
b.Replace the display;
c.Replace the controller;
a.Charge the battery;
b.Re-connect the battery and the controller;
c.Replace the controller;
d.Replace the display;
a.Re-connect the controller;
b.Replace the controller;
a.Replace the motor;
b.Replace the motor adapter cable;
c.Replace the controller;
EN
11