Publicidad
Idiomas disponibles
Idiomas disponibles
INFLATE TIRES
1. Attach quick connect air hose onto tire's valve stem and pull lever up to lock.
2. Plug power cord into 12 volt accessory power outlet.
3. Press on switch to turn on inflator. Inflate tire to manufacturer's recommended air pressure.*
When proper pressure is reached, press off switch to turn off inflator. Unplug power cord
and remove air hose connector.
*NOTE: Correct tire pressure can be found in vehicle owner's manual or on driver's side door
jamb.
USING THE ADAPTERS CABLES
Direct pre-wire adapter for motorcycles
1. Attach cables to battery, positive (red) side first.
2. Plug inflator power cord into female 12V plug receptacle.
3. Follow instructions for Inflating Tires.
Direct connect adapter for 12V batteries
1. Attach battery clips to battery, positive (red) side first.
2. Plug inflator power cord into female 12V plug receptacle.
3. Follow instructions for Inflating Tires.
USING THE ADAPTERS
PULL UP
TO LOCK
PULL DOWN
TO UNLOCK
12V
1. To unlock the hammerhead valve, pull
handle upward.
2. Place in adapter and push down on handle
to lock in adapter.
Publicidad
