Controllo Casa USBy Manual Del Usuario página 26

V : 6.1 Page : 26/64
ERSIONE
3. Turn on USBy by connecting it to the mains using a special adapter (eg adapters used to
recharge mobile phones) near the Router / Modem (approx. 1-3m) or to the USB port of your
Router / Modem
4. Open the list of WiFi networks and select the network created by USBy (eg USBy-
Vx_yyyyyy)
5. Open your Web Browser and enter the following URL 192.168.4.1/reset.html
6. At this point you will need to:
- Disconnect the USBy device from the power outlet
- Turn on your Router / Modem
- Connect the USBy device to the power outlet
- Repeat the procedure for Connect USBy to the Router / Modem as described in paragraph
2.1.1 of the User Manual
www.ControlloCasa.it info@controllocasa.it +39 06 94804820