Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
This product is only suitable for professional use, and does not apply to security for other purposes.
This product is designed for indoor use, it is IP20 protection class. Lamps should be kept dry to avoid
moisture, overheating or dusty environment. Prevent lamps get in contact with water or any other
liquid. The use of this product should pay attention to: fire, heat, electric shock, ultraviolet radiation,
the lamp to explode or shedding caused serious or fatal injury. Be sure that when you install the unit
in a truss system, all the truss clamps are well close and pressed. All the structure where the devices
are installed must support perfectly all the weight.
Anti-high temperature
Please don't use the equipment if the temperature above 40℃.
Rupture prevention
The lens should be replaced when they are damaged or presents any problem. Replace always with an
original lamp from MARK PRO.
Len size：128*32mm
To prevent falling wounding
Please don't move the package by one person only. If the device is going to be transport, please, verify
that the facilities to be able to withstand the weight of the lamps at least 10 times more.
Please make sure the truss structure is strong enough, and use always a steel wire as auxiliary security
between the device and the structure.
3
Publicidad
