Publicidad
Idiomas disponibles
Idiomas disponibles
Beam 350 has on its front panel a screen and buttons for navigation through the menu and selection
of functions, effects and settings. To turn on the unit, please, connect it first to the network, be sure
that everything is connected correctly on the device and if it doesn't show any problem, turn on the
device.
Below are the main parts of the unit.
To connect more than one unit in slave mode, please, follow this draw. The output of the first unit must
provide to the next dmx input of the signal, like this is possible send the signal to all the devices in the
chain.
1
Lens
2
Body
3
Tilt Lock
4
Arm
5
Pan Lock
6
Handle
7
Light base
8
Control panel
9
Control wheel
10
3 pin dmx in
11
5 pin dmx in
12
Power switch
13
Power in
14
3 pin dmx out
15
5 pin dmx out
16
Fuse
6
Publicidad
