Publicidad
Idiomas disponibles
Idiomas disponibles
1
Turn razor to Off (O) position, remove
plug from outlet and disconnect from
outlet.
C
2
Press the Razor Head Release Button and
remove Razor Head Assembly from the
razor unit.
C
3
Brush the inside of the razor housing.
4
Turn Razor Head Assembly over so that
underside is exposed.
C
5
Turn wheel of frame counterclockwise.
6
Remove the frame and brush clean.
C
7
Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
8
Separate the cutter from the comb.
C
9
Only brush the cutter in an upward
motion. Use the short bristled side of the
brush.
ENGLISH
15
Publicidad
