Chopper Use instructions
DESCRIPTION
1. Power button
2. Lid
3. Cutter
4. Blade pin
5. Container
6. Body housing
BEFORE USE
Before using the appliance for the first time, wash the bowl, lid, and cutter, rinse and wipe carefully.
Warm food need to be cool down and not exceed 60°C.
Suggestions :
Meat
Fish
Onion, garlic
Fruit
Large food should be cut into 2/3cm pieces.
To not damage the cutter, do not cut or grind hard food like frozen food, ice, cereal, rice, spices or
coffee beans.
USE
Fix the cutter inside the chopping container.
Put the food into the chopping container, do not exceed the level of the unlock cutter.
Put the lid onto the chopping container in the correct way.
Put the motor housing onto the lid, please take attention to the two pins.
Connect to the socket. Press down on the power button with the palm of the hand to start.
Do never press on the power button for more than 10 seconds.
To turn off the appliance release the power button.
Wait until the cutter has completely stopped and lift the lid and motor housing.
Disconnect the cord from the socket after use.
FOR BETTER RESULTS
The electric food chopper Beper operates at elevate speed and the action of the cutter is to drop
cleanly, and not to crush and bruise tissue and fibres as is the case with the conventional mincer.
Thus, food keep their moisture, nutritious value and natural flavour.
The electric food chopper will prepare:
Remove bones, skin and nerves
Remove ribs and skin
Remove skin
Remove skin and pits
10