Publicidad
Idiomas disponibles
Idiomas disponibles
The models T²-30 (and 36-T30) (30" capacity) and T²-50 (50" capacity) can be attached to the 36-729 Cabinet Saw,
Delta 10" Professional Table Saws, Delta Contractors Saws, and Unisaws, in addition to other brands of table
saws. The T² Fence System includes the fence, guide tube, front guide rail, and rear guide rail.
NOTICE: The manual cover illustrates the current production model. All other illustrations contained in the manual are
representative only and may not depict the actual labeling or accessories included. These are intended to illustrate
technique only.
1
2
3
5
8
9
6
11
7
12
11
1. Rear Guide Rail
2. Front Guide Rail
3. Guide Tube
4. 36-726 Fence
5. 3/8-24x1 1/4" Hex Head Bolt (2)
6. M8x1.25 x 30mm Flat Head Screw (2)
7. M8x1.25x16mm Hex Head Screw (6)
8. 8mm Lockwasher (8)
9. M8x1.25 Hex Nut (2)
10. 8mm Flat Washer (2)
11. 3/8" Lockwasher (4)
12. 3/8-24 Hex Nut (2)
13. 5mm Hex Wrench
14. 4mm Hex Wrench
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning
your machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
FUNCTIONAL DESCRIPTION
CARTON CONTENTS
4
ADDITIONAL HARDWARE FOR T2-30
13
15
19
14
FIG. 2
15. 3/8-24x1 1/4" Hex Head Bolt (2)
16. 3/8" Flat Washer (4)
17. 3/8" Lockwasher (4)
18. 3/8-24 Hex Nut (2)
19. M8x1.25 x 30mm Flat Head Screw (2)
20. 8mm Lockwasher (2)
21. 8mm Flat Washer (2)
22. M8x1.25 Hex Nut (2)
NOTE: You cannot use the T
sheet metal extension wings.
NOTE: Items 15 through 22 are used only with the T
and are packed in the rail container.
4
WHEN USED WITH SAWS
HAVING SHEET METAL WINGS
16
17
20
21
22
50 with saws that have
2-
18
30
2-
Publicidad
