Dometic MYFRIDGE MF 5M Instrucciones De Uso página 11

MF 5M
7 Technical description
The device has an integrated mains adapter with a priority circuit. The device
switches automatically to mains operation when the device is connected to a 230 V
AC mains supply even if the 12 V connection cable is still connected.
Its cooling system is a non-wearing Peltier cooling system with the heat discharged
by a fan.
7.1 Description of the device
Connection sockets and control panel (rear of the device):
No. in
2, page 3
1
2
3
4
5
8 Operation
!
NOTE
Before starting your refrigerator for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (see also
chapter "Cleaning and maintenance" on page 13).
8.1 Saving energy
• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• If the cooler has a basket: For optimal energy consumption, position the basket
according to its position on delivery.
• On a regular basis, make sure the lid seal still fits properly.
EN
Description
230 V AC socket
12 V DC socket
Mode switch
"HOT" LED (red): indicates heating mode
"COLD" LED (green): indicates cooling mode
Technical description
11