VALBERG UF NF 240 E S180C Instrucciones De Uso página 21

B
Reversing the door
The side in which the door opens can be changed from the right side (as supplied) to the left
side, if the installation site allows for it. Tools you will need:
8mm socket wrench
Cross-shaped screwdriver
NOTE
Before you start lay the freezer on it's back in order to gain
access to the base, you should rest it on soft foam packaging
or similar material to avoid damaging the backboard of
the freezer. To reverse the door. The following steps are
generally recommended.
Using the appliance
Not provided
Thin-blade screwdriver
Monkey wrench
Additional parts (in the plastic bag)
14
Left Hinge
Left Hinge Cover
Right Screw Cover
EN
Putty knife
7mm wrench