Commercial Electric GUARDIAN GRD64-PC-4K-BZ Guía De Uso Y Cuidado página 5

Installation
1
For best results
Install light 8-15 feet above the ground
for wall and eave applications, or on
ground for flood applications.
The fixture can be mounted in multiple
ways:
A. Wall/Eave Mount: The light fixture (A)
can be wall mounted (fig 1) or eave mounted
(fig 2) using the mounting plate cover (C)
and mounting plate (D) over a junction box
(sold separately).
NOTE: While using the light fixture (A) as eave mounted
(fig 2), the photocell sensor (B) may not function properly.
In this case, it is advisable to use the light fixture (A) with
switch-control mode instead of photocell control mode.
B. Threaded Knuckle Mount: The light fixture (A)
can be mounted using the threaded knuckle (H)
into a weather proof cover (not included) on a
junction box or a landscape ground stake
(not included) (fig 3).
If using a dimming switch, use a 0-10V dimmer.
INFORMATION: Weather proof cover plates, junction
boxes and landscape ground stakes are available.
Please contact your retailer or Commercial Electric
customer support to locate the correct parts needed
to complete the install.
2
Shut off electric power off
Verify wall switch is in OFF position (fig 4).
At the main electrical panel, turn off
the circuit breaker that supplies power
to the junction box you are working on
(fig 5).
For screw-in type fuses, unscrew the
fuse that supplies power to the junction
box you are working on (fig 6).
(fig 1).
(fig 2).
Mounted to weather
proof cover with 1/2"
NPSM Pipe Thread
(sold separately)
(fig 4). (fig 5).
5
Mounting plate
and mounting
plate cover
(Included)
Wall Mount
Eave Mount
Threaded Knuckle Ground Mount
Mounted to landscape
ground stake with 1/2"
NPSM Pipe Thread
(sold separately)
(fig 3).
(fig 6).