Commercial Electric GUARDIAN GRD64-PC-4K-BZ Guía De Uso Y Cuidado página 7

Installation (continued)
4
Remove the mounting plate for
Wall/Eave mount option
For mounting to standard junction box
Remove the mounting plate (D) from the
mountingplate cover (C) by loosening the
mounting plate set scre w (E) using the
included allen wrench-1 (CC) (fig 12).
Align the holes of the mounting plate (D) with
the "TOP" marking oriented upwards OR
(closest to wall if eave mounted) with the
junction box. Secure the mounting plate (D) to
the junction box with the two #8-32 x 3/4"
Phillips head screw
TIP: Only unscrew the mounting plate set screw (E) far
enough to remove the mounting plate (D).
Do not fully remove the mounting plate set screw (E).
5
Hook Hands-Free Install Wire
For mounting to standard junction box
Take the round "ball" head of the hands-free
wire (F), attached to back of mounting plate
cover (C) and place it behind the bottom-center
"notch" of the mounting plate (D) (fig 14).
Ensure the fixture can now hang freely to allow
for hands-free connection of the electrical wires.
NOTE: After electrical connections are made
un-hook the hands-free wire (F) and then mount the
fixture onto the mounting plate (D).
(AA) (fig 13).
7
(fig 12).
(fig 13).
(fig 14).