Montipower VINYL ZAPPER ULTIMATE CORDLESS Manual De Instrucciones página 11

®
VINYL ZAPPER ULTIMATE CORDLESS
Figure 4
5.2 Attaching the Vibration absorbing handle
Always work with the vibration absorbing handle (4). Attach the handle on the top or
bottom side of the tool, depending on working position, and secure. See Figure 5.
Figure 5
5.3 Attaching the Protective Cap
Always work with the Protective Cap (6).
Installing:
Slide the Protective Cap (6) over the cams on the front end as shown below and
secure by tightening the screw on the side. See Figure 6.
1
Figure 6
Insert
Pull out
2
EN
3
11