Montipower VINYL ZAPPER ULTIMATE CORDLESS Manual De Instrucciones página 9

®
VINYL ZAPPER ULTIMATE CORDLESS
4.3 Additional Safety Instructions
WARNING
• Accessories must be stored and handled with care in accordance with the
manufacturer's instructions.
• The workpiece must lay flat and be secured against slipping, e.g. using clamps.
Large workpieces must be sufficiently supported.
• Damaged, eccentric or vibrating tools must not be used.
• Disconnect the battery before making any adjustments to convert or service
the power tool.
• A damaged or cracked handle must be replaced. Never operate a power tool
with a defective handle.
• A damaged or cracked Protective Cap must be replaced.
Reducing dust exposure:
WARNING
chemicals known to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• Chemicals present in adhesives or fillers
• Chlorides from PVC films
Your risk from these exposures varies depending on the surfaces being treated and
how often you do this type of work. To reduce your exposure to chemicals work in a well
ventilated area and work with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.
Observe all relevant guidelines and national regulations for your surface material, staff,
application and place of application (e.g. occupational health and safety regulations,
disposal).
Use a suitable extraction unit.
Collect the particles generated at the source and avoid deposits to the surrounding area.
Use suitable accessories for special work so that fewer particles enter the environment in
an uncontrolled manner.
Reduce dust exposure with the following measures:
• do not direct the escaping particles and the exhaust air stream at yourself or nearby
persons or on dust deposits,
• use an extraction unit and/or air purifiers,
• ensure good ventilation of the workplace and keep it clean using a vacuum cleaner.
Avoid sweeping or blowing that stirs up dust.
• Vacuum or wash protective clothing. Do not blow, beat or brush.
– Always wear protective goggles.
– Dust created by the MontiPower
® ®
Vinyl Zapper process may contain
EN
9