Montipower VINYL ZAPPER ULTIMATE CORDLESS Manual De Instrucciones página 12

EN Operating instructions
6. Fitting the Vinyl Zapper
Disconnect the battery from the power tool before changing the Vinyl Zapper
The power tool must be switched off and the spindle at a standstill.
6.1 Positioning the accessory
See illustration below (Figure 7).
a. The Vinyl Zapper
easy replacement of the wheel. Position the Vinyl Zapper
Easy Lock system and secure by rotating the upper disc in the "Close" direction
printed on the Easy Lock system. To replace the Vinyl Zapper
upper disc in the "Open" direction to unlock.
Figure 7
6.2 Operating the tools/ Working Instructions
Always guide the power tool with both hands.
Switch the power tool on first, then guide the accessory toward the workpiece.
The power tool must not be allowed to draw in additional dust and shavings. When
switching the tool on and off, keep it away from dust deposits. After switching off the
tool, only place it down when the motor and accessories have come to a complete
stop.
a. To start the tool, push the start button forward, the switch will lock itself
automatically. (Figure 8).
12
®
wheel
®
wheels are equipped with a plastic inner ring for quick and
®
VINYL ZAPPER ULTIMATE CORDLESS
®
wheel correctly on the
®
wheel, rotate the
®
wheel.