JVC KD-R690S Manual De Instrucciones página 15

AUDIO SETTINGS
EQ SETTING
PRESET EQ Select a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].
FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/R&B/
TALK/USER/VOCAL BOOST/BASS BOOST/CLASSICAL/DANCE
EASY EQ Adjust your own sound settings.
• The settings are stored to [USER].
• The settings made may affect the current settings of [PRO EQ].
SUB.W SP * 1 * 2
: 00 to +06
SUB.W * 1 * 3
: –08 to +08
BASS : LVL–06 to LVL+06
MID : LVL–06 to LVL+06
TRE : LVL–06 to LVL+06
PRO EQ Adjust your own sound settings.
• The settings are stored to [USER].
• The settings made may affect the current settings of [EASY EQ].
1 BASS/MIDDLE/TREBLE: Select a sound tone.
2 Adjust the sound elements of the selected sound tone.
BASS Frequency
Level
Q
( Default
MIDDLE Frequency
Level
Q
(Default
TREBLE Frequency
Level
Q
(Default
Default: XX
(Default: +03
00
LVL 00
LVL 00
LVL 00)
: 60HZ/80HZ/100HZ/200HZ
: LVL–06 to LVL+06
: Q1.0/Q1.25/Q1.5/Q2.0
: 80HZ/LVL 00/Q1.0)
: 0.5KHZ/1.0KHZ/1.5KHZ/2.5KHZ
: LVL–06 to LVL+06
: Q0.75/Q1.0/Q1.25
: 1.0KHZ/LVL 00/Q1.25)
: 10.0KHZ/12.5KHZ/15.0KHZ/17.5KHZ
: LVL–06 to LVL+06
: Q FIX
: 10.0KHZ/LVL 00/Q FIX)
AUDIO CONTROL
BASS BOOST LEVEL +01 to LEVEL +05 (LEVEL +01): Selects your preferred bass
boost level. ; OFF: Cancels.
LOUDNESS LEVEL 01/LEVEL 02: Boosts low or high frequencies to produce a
well-balanced sound at low volume. ; OFF: Cancels.
SUB.W LEVEL * 1 SPK-OUT * 2
PRE-OUT * 3
SUBWOOFER SET * 3
ON: Turns on the subwoofer output. ; OFF: Cancels.
SUBWOOFER LPF * 1
FRQ THROUGH: All signals are sent to the subwoofer. ;
FRQ 55HZ/FRQ 85HZ/FRQ 120HZ: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W PHASE * 4
REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
FADER POSITION R06 to POSITION F06 (POSITION 00): Adjusts the front
and rear speaker output balance.
BALANCE *
5
POSITION L06 to POSITION R06 (POSITION 00): Adjusts the left and
right speaker output balance.
* 1
Displayed only when [SUBWOOFER SET] is set to [ON].
* 2
Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 16)
* 3
Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W].
( 16)
* 4
Selectable only if a setting other than [FRQ THROUGH] is selected for [SUBWOOFER LPF].
* 5
This adjustment will not affect the subwoofer output.
SUB.W 00 to SUB.W +06 (SUB.W +03): Adjusts the
output level of the subwoofer connected via speaker
lead. ( 24)
SUB.W –08 to SUB.W +08 (SUB.W 00): Adjusts
the output level of the subwoofer connected to the
lineout terminals (REAR/SW) through an external
amplifier. ( 24)
ENGLISH
15