Multimetrix CM604 Manual De Instrucciones página 12

„ This clamp meter measures AC/DC Voltage, AC Current, Frequency, Resistance, Diode Test.
Continuity, Capacitance, Temperature.
„ The clamp meter also offers a Non-Contact AC Voltage detector and flashlight for added convenience.
„ Proper use and care of this clamp meter will provide many years of reliable service.
1. SAFETY ..................................................... 12
1.1. Precaution of use ............................... 12
1.2. Input Limits ......................................... 13
1.3. Definition of Symbols .......................... 13
2. DESCRIPTION .......................................... 14
2.1. Clamp meter Description .................... 14
2.2. Symbols Used on LCD Display .......... 14
3. BUTTON FUNCTIONS ............................. 15
3.1. MODE button ...................................... 15
3.2. RANGE button .................................... 15
3.3. MAX/MIN button ................................. 15
3.4. HOLD and flashlight button ................ 15
3.5. Auto Power Off ................................... 15
3.6. Low Battery Indication ........................ 15
4. USE ............................................................ 16
4.1. AC Current Measurement ................... 16
1.1. PRECAUTION OF USE
This instrument is compliant with safety standards IEC/EN 61010-032 or BS EN 61010-032 and IEC/
EN 61010-2-033 or BS EN 61010-2-033, and the leads are compliant with IEC/EN 61010-031 or BS
EN 61010-031, for voltages up to 600V in category III.
Failure to observe the safety instructions may result in electric shock, fire, explosion, and destruction
of the instrument and of the installations.
„ The operator and/or the responsible authority must carefully read and clearly understand the various
precautions to be taken in use. Sound knowledge and a keen awareness of electrical hazards are
essential when using this instrument.
„ If you use this instrument other than as specified, the protection it provides may be compromised,
thereby endangering you.
„ Do not use your instrument on networks of which the voltage or category exceeds those stated.
„ Observe the environmental conditions of use.
„ Do not use the instrument if it seems to be damaged, incomplete, or poorly closed.
„ Before each use, check the condition of the insulation on the leads, housing, and accessories. Any
item of which the insulation is deteriorated (even partially) must be set aside for repair or scrapping.
„ Use leads and accessories rated for voltages and categories at least equal to those of the instrument.
If not, an accessory of a lower category lowers the category of the combined device + accessory
to that of the accessory.
„ Do not use the instrument in an explosive or dust-laden atmosphere.
„ Keep your fingers behind the physical guard.
ENGLISH
CONTENTS
4.2. AC Voltage Measurement .................. 16
4.3. Resistance Measurement ................... 16
4.4. Diode Test........................................... 16
4.5. Continuity Check ................................ 17
4.6. Capacitance Measurement ................ 17
4.7. Temperature Measurement ................ 17
4.8. Non-Contact AC Voltage Detection .......18
5. SPECIFICATIONS .................................... 18
5.1. Specifications ..................................... 18
5.2. General Specifications ....................... 20
6. MAINTENANCE ........................................ 20
6.1. Maintenance and cleaning ................. 20
6.2. Replacing the battery ......................... 21
7. WARRANTY .............................................. 21
1. SAFETY
12