Miele PDR 516 SL EL Plano De Instalación página 30

en - Technical data
Possible voltage variants
3N AC 400 V, 50/60 Hz
Supply voltage
Frequency
Power rating
Fuse rating (on site)
Circuit breaker trip characteristic
Minimum cross-section for connection cable
3 AC 230 V, 50/60 Hz
Supply voltage
Frequency
Power rating
Fuse rating (on site)
Circuit breaker trip characteristic
Minimum cross-section for connection cable
Exhaust air
Maximum nominal volume flow rate
Maximum permitted pressure loss
Connector on machine side (external diameter)
Maximum exhaust air temperature
As relative humidity inside the exhaust ducting can be as high as 100 %, suitable measures must be taken to prevent a backflow of
condensate into the machine.
Air intake
Standard connection: air intake from installation site
There must be sufficient air intake to the installation site to match the air outlet volume.
Alternative connection: air intake directly from outdoors
Connection sleeve on machine side (internal diameter)
Removing the protective cover exposes live parts. For safety reasons, a pipe must be installed from the tumble dryer's central fresh air
intake (over a minimum length of 900 mm) and secured with 2 screws.
Machine data
Machine width, total
Machine height, total
Machine depth, total
Niche width
Recommended wall spacing
Minimum wall distance
Packaging width
Packaging height
Packaging depth
Maximum gross volume
30
Standard connection
3N AC 400 V
50/60 Hz
14,1 kW
3×25 A
Type B
4 mm²
Standard connection
3 AC 230 V
50/60 Hz
14,1 kW
3×40 A
Type B
10 mm²
790 m³/h
350 Pa
150 mm
80 °C
161 mm
711 mm
1800 mm
1089 mm
1050 mm
1500 mm
500 mm
800 mm
1810 mm
1180 mm
1709 l