Publicidad
Idiomas disponibles
Idiomas disponibles
56
emergency and test operation
emergency operation
• Use this operation only when the remote control is defective or
lost, and with function of Emergency running air conditioner can
run automatically for a while.
• When the emergency operation switch is pressed, a "Pi" sound is
heard once, which means the start of this operation.
• When POWER switch is turned on for the first time and emergency
operation starts, the unit will run automatically in the following
mode:
• It is not possible to change the temperature setting or fan speed
setting. It is also not possible to operate the timer or the DRY
mode.
Room
temperature
Above 23 °C
test operation
• Test operation switch is the same as emergency switch.
• Use this switch in the test operation when the room temperature
is below 16 °C, do not use it in the normal operation.
• Continue to press the test operation switch for more than 5 sec-
onds. After you hear two "Beeps", release your finger from the
switch: the cooling operation starts with the air flow speed at
"Hi".
Beep Beep
• Under this operation mode, the fan motor of the indoor unit will
run at HIGH speed.
Pi
Designated
TIMER mode
temperature
26 °C
No
Operation
Fan Speed
mode
AUTOMATIC
COOLING
Publicidad
