Servicing And Maintenance - Festool EHL 65 E Manual De Instrucciones

10.3
10.2
10.1
10
The accessory and tool order number can
be found in the Festool catalogue or on the
Internet under www.festool-usa.com.
Systainer
Many Festool products are shipped in a
unique system container, called "Systainer".
This provides protection and storage for the
tool and accessories. The Systainers are
stackable and can be interlocked together.
They also can be interlocked atop Festool CT
dust extractors.
– Place one systainer on top of the other.
– Release all four latches on the lower sys-
tainer by pulling back at their top edges
(10.1).
– Slide all four latches upward (10.2).
– Snap all four latches back to their fl at po-
sition (10.3) so they engage the stacking
tabs of the upper systainer.
Servicing and
maintenance
Any maintenance or repair
work that requires opening of the motor
or gear housing should only be carried
out by an authorised Customer Service
Centre (name supplied by your dealer)!
Maintenance or repair work carried out by an
unauthorised person can lead to the wrong
connection of the power leads or other com-
ponents, which in turn can lead to accidents
with serious consequences.
To prevent accidents, al-
ways remove the plug from the power
supply socket before carrying out any
maintenance or repair work on the ma-
chine! Do not use compressed air to clean
the electrical tool! Do not try to clean parts
inside the machine in this way, as you could
let foreign objects in through the openings
of the machine housing.
Certain cleaning agents and
solvents are harmful to plastic parts.
Some of these are: gasoline, carbonyl chlo-
ride, cleaning solutions containing chlorine,
ammonia and household cleaners containing
ammonia.