FITFIU FITNESS RA-500 Manual De Usuario página 15

04
ASSEMBLY
Step by step
Load the cushion set into the
slide rails.
05
To install the foot pedals,
06
locate the two brackets on
the inside of the rails. Insert
the sides of the pedals
connected bar into the
brackets.
Once the foot pedals
have been placed into the
brackets, use the provided
locking pins to secure the
foot pedals in place. Locate
the opening in the bracket
that aligns with the hole in
the side of the foot pedals
bar. Insert the Locking pin all
the way through. Repeat for
the other side.
Install the rear connection
and the stopper into the
slide rail set. Use the 5mm,
6mm type hex wrench,
2M8x20 semi-circular
hexagon socket head cap
screws, 2 curved washers,
and 1M8x35 hexagon socket
head cap screw to lock the
rear support. Finally, lock all
the screws.
15
Plug in the power cord. A 'click' sound will be heard and the meter will also light up. If the seat does not slide
smoothly during use, add a small amount of oil in the track.
Your RA-500 is now ready to use!
07
EN - RA-500