Safeguards And Warnings - Axis Q1755-E Guia De Instalacion

AXIS Q1755-E Installation Guide

Safeguards and warnings

Please read through this Installation Guide carefully before installing the product. Keep the
Installation Guide for further reference.
!
CAUTION!
• When transporting the Axis product, use the original packaging or equivalent to prevent
damage to the product.
• Avoid exposing the Axis product to vibration, shocks or heavy pressure and do not install the
camera on unstable brackets, unstable or vibrating surfaces or walls, since this could cause
damage to the product.
• Only use handtools when installing the camera, the use of electrical tools or excessive force
could cause damage to the product.
•
Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.
• Only use accessories and replacement parts provided or recommended by Axis.
• Do not attempt to repair the product by yourself, contact Axis or your Axis reseller for service
matters
!
IMPORTANT!
• This Axis product must be used in compliance with local laws and regulations.
• Store and transport the Axis product in a dry and ventilated environment.
Safety Notice - Battery replacement
This Axis product uses a 3.0V CR2032 Lithium battery as the power supply for its internal real-time clock (RTC).
Under normal conditions this battery will last for a minimum of 5 years. Low battery power affects the operation of
the RTC, causing it to reset at every power-up. A log message will appear when the battery needs replacing. The
battery should not be replaced unless required!
If the battery does need replacing, please contact www.axis.com/techsup for assistance.
• Danger of Explosion if battery is incorrectly replaced
• Replace only with the same or equivalent battery, as recommended by the manufacturer.
• Dispose of used batteries according to the manufacturer's instructions.
Page 3